Carpentry Foundation Harmonized Certificate
 |
Certificate |
 |
Priority admission for Indigenous students |
 |
Domestic applicants only |
Stay connected
Get program updates and event news straight to your inbox.
Applications open. |
Overview
The 24-week Carpentry Foundation program is a great way to start your career in carpentry, recognized in both residential and commercial building industries. It offers hands-on skill development while covering BC Provincial Apprenticeship Level 1 competencies.
You’ll Learn:
- Carpentry skills and knowledge for a career in construction
- BC Provincial Apprenticeship Level 1 competencies
- Practical, hands-on experience in carpentry
- Receive an NIC Carpentry Foundation Harmonized Certificate
- Earn credit for Level 1 technical training through an apprenticeship
- Gain 450 hours of work experience towards your required apprenticeship hours
There are two pathways to your red seal certification. A certificate program that gives you the basic knowledge and skills to enter a trade.
You don't need an employer/sponsor. This pathway combines on-the-job training with classroom learning. Pick this option
if you're working and sponsored by a company registered with SkilledTradesBC. Foundation vs. apprenticeship
Foundation
Apprenticeship
Requirements and courses
Supplies
Personal Protection Equipment
- Weather appropriate clothing
- CSA-approved steel-toed safety boots
- Safety glasses
- Hard hat
- Ear protection
Classroom Supplies
- Sharp Electronic Calculator (# EL-520WBBK or EL-520XTB)
- HB pencils
- Hi-lite marker
- Two 2” binders and note paper
- Drafting Equipment: Available at the NIC bookstore:
- Set square - 30/60/90 degree, Staedtler 964 10-60
- Set square - 45/45/90 degree, Staedtler 964 14-45
- Scale ruler, Imperial, Architects, Staedtler 987 18-31
- Scale ruler, Metric, Staedtler 987 18-SI
- Drawing compass, 559-09
- Good quality white eraser
- Non-mechanical pencils in: 6H, 4H, & 2H lead
Personal Tools
(Do not purchase until after the 1st day of class)
- Tool belt
- Tape measure 25’/8M (metric, imperial, or combo)
- Chalk line
- 2’ level - (optional)
- Nail puller
- Framing square (steel or aluminum) - (optional)
- Cross cut handsaw (10 point) - (optional)
- Utility knife & blades
- Speed square
- Framing hammer
Careers
After this Foundations Certificate, continue your apprenticeship path to complete your Red Seal certification in Carpentry.
Costs
Check the table below for estimated costs for the full program.
Curious about funding?
Financial support is available. Learn more about financial aid and awards.
How to apply
Apply for this program through EducationPlannerBC. After you’ve applied, you’ll receive an email from NIC with your next steps. Be sure to add @nic.bc.ca to your safe sender list.
Questions? We’re with you along the way. To contact a recruiter, email futurestudents@nic.bc.ca.
“One memory that stands out for me is when our instructor had our class create a spiral staircase from start to finish. We worked through all the math, made the structural drawings, and then went out and built the staircase.”
Malcolm Fjeld - NIC Fabricator-Welder Foundation alum
"I love learning the intricate techniques to build something by hand. You have to be so precise and also patient with the piece you're working on. Our instructor Steven was so supportive. He holds us to a high standard, but also ensures we develop our skills so we can meet that standard."
Katerina Boguslavsky - NIC Joinery/Cabinetmaking alum
"As soon as I started it, I fell in love with it. It’s an awesome program with amazing teachers. I learned a huge amount."
Ryan Ware - NIC Welding Foundation alum
"I really like building things, working with my hands and using the skill saws and hammering nails, so the carpentry program was a good fit. I work-part time as a labourer as well, so taking the dual credit program gives me more experience and a few more dollars an hour really quickly. It also worked out well as the carpentry program was offered in Campbell River."
Aidan Watson - NIC Dual Credit and Carpentry Foundation alum
"I’ve always been a hands-on learner, so I really enjoy that the Dual Credit program in welding has allowed me to try out different techniques so I can properly understand and explore the trade. The program is a great opportunity, especially as the tuition is mostly covered."
Victor Malinski - NIC Dual Credit and Welding Foundation alum
Your path to Red Seal Certification
Frequently asked questions
Trades training prepares students for hands-on careers in skilled trades such as construction, mechanics, electrical work, plumbing, culinary and more. Programs combine classroom learning with practical, industry-specific skills.
NIC’s trades programs include:
- Automotive Collision and Refinishing Foundation
- Automotive Service Technician Foundation
- Carpentry Foundation
- Electrician Foundation
- Fabricator-Welder Foundation
- Furniture and Joinery
- Heavy Mechanical Trades Foundation
- Instrumentation and Electrical Automation
- Motor Sport and Power Equipment (motorcycle) Foundation
- Plumbing and Piping trades Foundation
- Parts and Warehousing Foundation
- Trades Sampler
- Welder Foundation
Typically, NIC offers:
- Pre-apprenticeship (Foundation) programs: Level 1 Foundation training to prepare for entry-level positions.
- Apprenticeship programs: A combination of on-the-job training and classroom instruction, Level 1-4.
- Specialized certifications: Training in specific skills or safety standards, such as welding or forklift operation.
The duration depends on the type of program, but generally are:
- Pre-apprenticeship programs: Level 1 training is about 24-36 weeks.
- Apprenticeship levels: Typically 5 to 17 weeks in-class training per level, with multiple levels required for certification. There are usually 4 levels required to complete before writing the Red Seal certification exams.
- Certifications: Often a few weeks to a few months.
- To find an employer willing to sponsor you as an apprentice.
- To register with your province’s apprenticeship authority.
- To attend required technical training at a college.
NIC can help with these steps, reach out to the Trades department at trades-technicalprograms@nic.bc.ca
Yes, trades students may qualify for:
- Government grants or tax credits.
- Apprenticeship incentives for both students and employers.
- Scholarships or bursaries specific to trades programs.
NIC can give you information around funding and scholarships, reach out to the Trades department at trades-technicalprograms@nic.bc.ca
Absolutely! Colleges and industries actively encourage diversity in trades and often offer supports, mentorship programs, and funding for women and underrepresented groups.
NIC has funding available, reach out to the Trades department at trades-technicalprograms@nic.bc.ca
